Tester sa carte graphique!
-
Stochastic
- Membre du Conseil Jedi
- Messages : 16387
- Enregistré le : 20 févr. 2015 06:34
Tester sa carte graphique!
hello!
pour les défauts nombreux des catres graphiques!
windows ***
http://forums.cnetfrance.fr/topic/1317809-tester-sa-carte-graphique-avec-furmark/
FurMark_1.19.0.0_Setup.exe
http://www.commentcamarche.net/download/telecharger-34099284-furmark
linux
http://www.clubic.com/telecharger/linux/benchmarking/
unigine_valley_benchmark_1_0_fr_429653.run
http://www.clubic.com/telecharger-fiche429689-geekbench-2.html
geekbench_4-1-3_fr_429689.tar.gz
pour les défauts nombreux des catres graphiques!
windows ***
http://forums.cnetfrance.fr/topic/1317809-tester-sa-carte-graphique-avec-furmark/
FurMark_1.19.0.0_Setup.exe
http://www.commentcamarche.net/download/telecharger-34099284-furmark
linux
http://www.clubic.com/telecharger/linux/benchmarking/
unigine_valley_benchmark_1_0_fr_429653.run
http://www.clubic.com/telecharger-fiche429689-geekbench-2.html
geekbench_4-1-3_fr_429689.tar.gz
-
Benoist Rousseau
- Trader Futures / CME Member
- Messages : 174798
- Enregistré le : 06 sept. 2011 22:45
-
Stochastic
- Membre du Conseil Jedi
- Messages : 16387
- Enregistré le : 20 févr. 2015 06:34
Re: Tester sa carte graphique!
Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10, Français
il y a des configurations :
la résolution de l'écran
le test de la mémoire , sa capacité,
la température du cpu graphique!
-
Stochastic
- Membre du Conseil Jedi
- Messages : 16387
- Enregistré le : 20 févr. 2015 06:34
Re: Tester sa carte graphique!
geekbench_4-1-3_fr_429689.tar.gz
Installing Geekbench 4 on Linux
Installing on Geekbench requires some basic knowledge of the command prompt. If you're not already familiar with the command prompt I recommend reading the first few pages of this Linux command prompt tutorial
To install Geekbench, run the following commands from the folder where you downloaded Geekbench:
tar xf Geekbench-4.1.3-Linux.tar.gz
cd Geekbench-4.1.3-Linux/
./geekbench4
If the first command returns a "file not found" error, there's a chance your browser has already uncompressed Geekbench. Substitute this command as the first command:
tar xf Geekbench-3.2.0-Linux.tar
If you're running 64-bit Ubuntu install the 32-bit compatibility libraries with the following command:
sudo apt-get install libc6:i386 libstdc++6:i386
If you're running 64-bit Debian install the 32-bit compatibility libraries with the following commands:
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install libc6:i386 libstdc++6:i386
à l'installation!
Geekbench 4 is in tryout mode.
Geekbench 4 requires an active Internet connection when in tryout mode, and
automatically uploads test results to the Geekbench Browser. Other features
are unavailable in tryout mode.
Buy a Geekbench 4 license to enable offline use and remove the limitations of
tryout mode.
If you would like to purchase Geekbench you can do so online:
https://store.primatelabs.com/v4
Geekbench 4 est en mode testout.
Geekbench 4 nécessite une connexion Internet active en mode test et
télécharge automatiquement les résultats du test sur le navigateur Geekbench. Autres caractéristiques
ne sont pas disponibles en mode test.
Achetez une licence Geekbench 4 pour activer l'utilisation hors ligne et supprimer les limites de
mode essai.
Si vous souhaitez acheter Geekbench, vous pouvez le faire en ligne:
https://store.primatelabs.com/v4
Installing Geekbench 4 on Linux
Installing on Geekbench requires some basic knowledge of the command prompt. If you're not already familiar with the command prompt I recommend reading the first few pages of this Linux command prompt tutorial
To install Geekbench, run the following commands from the folder where you downloaded Geekbench:
tar xf Geekbench-4.1.3-Linux.tar.gz
cd Geekbench-4.1.3-Linux/
./geekbench4
If the first command returns a "file not found" error, there's a chance your browser has already uncompressed Geekbench. Substitute this command as the first command:
tar xf Geekbench-3.2.0-Linux.tar
If you're running 64-bit Ubuntu install the 32-bit compatibility libraries with the following command:
sudo apt-get install libc6:i386 libstdc++6:i386
If you're running 64-bit Debian install the 32-bit compatibility libraries with the following commands:
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install libc6:i386 libstdc++6:i386
à l'installation!
Geekbench 4 is in tryout mode.
Geekbench 4 requires an active Internet connection when in tryout mode, and
automatically uploads test results to the Geekbench Browser. Other features
are unavailable in tryout mode.
Buy a Geekbench 4 license to enable offline use and remove the limitations of
tryout mode.
If you would like to purchase Geekbench you can do so online:
https://store.primatelabs.com/v4
Geekbench 4 est en mode testout.
Geekbench 4 nécessite une connexion Internet active en mode test et
télécharge automatiquement les résultats du test sur le navigateur Geekbench. Autres caractéristiques
ne sont pas disponibles en mode test.
Achetez une licence Geekbench 4 pour activer l'utilisation hors ligne et supprimer les limites de
mode essai.
Si vous souhaitez acheter Geekbench, vous pouvez le faire en ligne:
https://store.primatelabs.com/v4
-
Stochastic
- Membre du Conseil Jedi
- Messages : 16387
- Enregistré le : 20 févr. 2015 06:34
Re: Tester sa carte graphique!
unigine_valley_benchmark_1_0_fr_429653.run
taper dans terminal!
allez dans le repertoire du fichier.run ci-dessus
$: sh unigine_valley_benchmark_1_0_fr_429653.run
il s'installe!!!!
Creating directory Unigine_Valley-1.0
allez dans ce repertoire!
tapez!
$: bash valley
une fenetre apparait
configurer les formulaires!
et en aavant!!!!!
RUN
il faut!
System requirements
Operating system:
Microsoft Windows XP / Vista / 7 / 8
[b] Linux (proprietary video drivers required)[/b]
Mac OS X 10.8+ (Mountain Lion)
GPU:
ATI Radeon HD 4xxx and higher
NVIDIA GeForce 8xxx and higher
Video memory: 512Mb
Disk space: 1.5 Gb
il faut aussi installer le micro-code du driver de la carte graphique
sous linux!
taper dans terminal!
allez dans le repertoire du fichier.run ci-dessus
$: sh unigine_valley_benchmark_1_0_fr_429653.run
il s'installe!!!!
Creating directory Unigine_Valley-1.0
allez dans ce repertoire!
tapez!
$: bash valley
une fenetre apparait
configurer les formulaires!
et en aavant!!!!!
RUN
il faut!
System requirements
Operating system:
Microsoft Windows XP / Vista / 7 / 8
[b] Linux (proprietary video drivers required)[/b]
Mac OS X 10.8+ (Mountain Lion)
GPU:
ATI Radeon HD 4xxx and higher
NVIDIA GeForce 8xxx and higher
Video memory: 512Mb
Disk space: 1.5 Gb
il faut aussi installer le micro-code du driver de la carte graphique
sous linux!
-
Stochastic
- Membre du Conseil Jedi
- Messages : 16387
- Enregistré le : 20 févr. 2015 06:34
Re: Tester sa carte graphique!
FurMark_1.19.0.0_Setup.exe
c'est ok!
pour celui là!
sur windows!!!!
c'est ok!
pour celui là!
sur windows!!!!